Trakonta ltd, 54031 Ukraine, Nikolaiv city, Electronnay street 81/4, E-mail: trakonta@gmail.com Tel: +380512714945; Mob, Viber: +380503180260
Electrogydropulse casting cleaning
The excellent quality of cleaning castings is ensured by the electrohydraulic technology based on use of an electric discharge occured between a special electrode and casting in liquid. Designed at Trakonta ltd a number of electrohydraulic plants allows to carry out knock-out of cores and remnants of moulding sands from thin and thick-walled steel, cast iron, aluminium, fitanium and other castings of any degree of complicacy and mass ranging from 100 g to 200 t.
You will be easily able to buy just that very plant, which is the most suitable for your foundry.
Trakonta ltd
Electrogydropulse casting cleaning.
Electrogydropulse casting cleaning.
The installation provide You with a possibility:
- to remove core and sand mixtures of practically any strength;
- to eliminate operations for fine cleaning castings;
- to reduce dust contamination at the fettlings bay by a factor of 10-12 times;
- to eliminate causes of occupational diseases;
- to reduce residual stresses in castings without heat treatment;
- to free operational areas.
Sphere of application: mass, large-scale, full-scale and single-piece foundry production.
Maximum overall dimensions of castings to be treated, mm:
12,000x7,000x3,800
Production capacity when knocking out cores from castings, t/h:
for cast iron, steel castings, up to 18;
for aluminium castings, up to 6.
The technological process is environmentally appropriate.
The installations are controlled with remote control panels and operate both in automatic and semi-automatic mode.
The technology and equipment have found a broad application in the Ukraine, Russia and have been exported to Japan, Germany, Sweden, Spain, Hungary, Roumania, India, Bulgaria, Slovakia and the Republic of Cuba. Various engineering services can be given buyers for the most effective use of the installations.
- to remove core and sand mixtures of practically any strength;
- to eliminate operations for fine cleaning castings;
- to reduce dust contamination at the fettlings bay by a factor of 10-12 times;
- to eliminate causes of occupational diseases;
- to reduce residual stresses in castings without heat treatment;
- to free operational areas.
Sphere of application: mass, large-scale, full-scale and single-piece foundry production.
Maximum overall dimensions of castings to be treated, mm:
12,000x7,000x3,800
Production capacity when knocking out cores from castings, t/h:
for cast iron, steel castings, up to 18;
for aluminium castings, up to 6.
The technological process is environmentally appropriate.
The installations are controlled with remote control panels and operate both in automatic and semi-automatic mode.
The technology and equipment have found a broad application in the Ukraine, Russia and have been exported to Japan, Germany, Sweden, Spain, Hungary, Roumania, India, Bulgaria, Slovakia and the Republic of Cuba. Various engineering services can be given buyers for the most effective use of the installations.
Casting cleaning installation in operation
All rights reserved by Trakonta 1996 – 2021
